• Radios
    • 2.4 GHz 802.11b/g/n client access radio
    • 5 GHz 802.11a/n/ac client access radio
    • 2.4 & 5 GHz dual-band WIDS/WIPS, spectrum analysis, & location analytics radio
    • 2.4 GHz Bluetooth radio with Bluetooth Low Energy (BLE) and Beacon support
    • Concurrent operation of all four radios
    • Max aggregate frame rate 2.5 Gbit/s
    • Supported frequency bands (country-specific restrictions apply):
      • 2.412-2.484 GHz
      • 5.150-5.250 GHz (UNII-1)
      • 5.250-5.350 GHz (UNII-2)
      • 5.470-5.600, 5.660-5.725 (UNII-2e)
      • 5.725-5.825 GHz (UNII-3)
  • Antenna
    • Integrated omni-directional antennas (5 dBi gain at 2.4 GHz, 6.2 dBi gain at 5 GHz)
    • Individual antenna elements for each radio
  • 802.11ac Wave 2 & 802.11n Capabilities
    • 4x4 multiple input, multiple output (MIMO) with four spatial streams
    • SU-MIMO and MU-MIMO support
    • Maximal ratio combining (MRC) & beamforming
    • 20 & 40 MHz channels (802.11n); 20, 40, 80, and 160MHz channels (802.11ac)
    • Up to 256-QAM on both 2.4 & 5 GHz
    • Packet aggregation
  • Power
    • Power over Ethernet: 37 - 57 V (802.3at required; functionality-restricted 802.3af mode supported)
    • Alternative 12V DC input
    • Power consumption: 21 W max (802.3at)
    • Power over Ethernet injector and DC adapter sold separately
  • Interfaces
    • 2 × 10/100/1000Base-T Ethernet (RJ45)
    • 1 × DC power connector (5.5mm x 2.5mm, center positive)
  • Mounting
    • All standard mounting hardware included
    • Desktop, ceiling, and wall mount capable
    • Ceiling tile rail (9/16, 15/16 or 1 ½" flush or recessed rails), assorted cable junction boxes
    • Bubble level on mounting cradle for accurate horizontal wall mounting
  • Physical Security
    • Two security screw options (included)
    • Kensington lock hard point
    • Concealed mount plate with anti-tamper cable bay
  • Environment
    • Operating temperature: 32 °F to 104 °F (0 °C to 40 °C)
    • Humidity: 5 to 95% non-condensing
  • Physical Dimensions
    • 10.56” x 6.38” x 1.58” (268.2 mm x 162.0 mm x 38.8 mm), not including deskmount feet or mount plate
    • Weight: 28.9 oz (820g)
  • Security
    • Integrated Layer 7 firewall with mobile device policy management
    • Real-time WIDS/WIPS with alerting and automatic rogue AP containment with Air Marshal
    • Flexible guest access with device isolation
    • VLAN tagging (802.1q) and tunneling with IPsec VPN
    • PCI compliance reporting
    • WEP, WPA, WPA2-PSK, WPA2-Enterprise with 802.1X
    • EAP-TLS, EAP-TTLS, EAP-MSCHAPv2, EAP-SIM
    • TKIP and AES encryption
    • Enterprise Mobility Management (EMM) & Mobile Device Management (MDM) integration
    • Cisco ISE integration for Guest access and BYOD Posturing
  • Quality of Service
    • Advanced Power Save (U-APSD)
    • WMM Access Categories with DSCP and 802.1p support
    • Layer 7 application traffic identification and shaping
  • Mobility
    • PMK, OKC, and 802.11r for fast Layer 2 roaming
    • Distributed or centralized layer 3 roaming
  • Analytics
    • Embedded location analytics reporting and device tracking
    • Global L7 traffic analytics reporting per network, per device, & per application
  • Warranty
    • Lifetime hardware warranty with advanced replacement included
  • Ordering Information
    • MR52-HW
      Meraki MR52 Cloud Managed 802.11ac AP
    • MA-PWR-30W-XX
      Meraki AC Adapter for MR Series (XX = US, EU, UK, or AU)
    • MA-INJ-4-XX
      Cisco Meraki 802.3at PoE Injector (XX = US, EU, UK, or AU)

Note: Meraki access point license required.